Home » Jet Performance Chips
The ECM in the vehicle looks at various sensors such as manifold vacuum, coolant temperature, throttle position and RPM, it then processes this information and adjusts spark timing, air/fuel ratio and other parameter according to the tables stored in the JET Performance chip/module memory. By recalibrating these tables we are able to tune the engine for the maximum horsepower and torque under various driving conditions.
By installing the JET chip or module these extra increases in performance enhance drivability, towing capabilities, reduce ¼ miles times and provide improved overall efficiency.
Features
Stage 1:
If you have a stock engine with no other modification, this is the chip for you. The JET Stage 1 performance Chip is programmed for maximum power increases on a stock vehicle for improved performance under hard throttle conditions such as towing and wide open throttle acceleration. *Special Note: Stage 1 Chips are street legal in all 50 states. *CARB EO#D-234-4
Stage 2:
Designed for modified vehicles with low restriction exhaust and low temperature thermostat. The JET Stage 2 Performance Chip has been calibrated for peak horsepower in cases where the engine has been modified to run cooler and the exhaust system is less restrictive than original equipment. *Special Note: Stage II Chips are street legal in all 50 states. *CARB E0#D-234-4
Performance Based on stock vehicles at the drive wheels with a JET chip/module installed using 91 octane or higher the performance increase is between 10-25 horsepower.
This Kit Includes • Stage 1 or Stage 2 Performance Module (as specified)
Installation Installation Time: 10-15 minutes.
« Previous | Next »
